What car key replacement means
Car key replacement means making a new, working key when the original is gone or can't be used: lost, stolen, snapped or worn past the point of turning. We cut the blade to fit your locks and, if your car uses a chip, program the key so the engine starts. Both happen at the vehicle, so there's no tow to the dealer.
If you still have one good key and just want a spare, that's a simpler job called a car key copy. Replacement is for when there's no working key left to copy, or the one you have is damaged.
Which kind of key do you have?
The key type decides what the job involves:
- Metal-only key: a plain blade with no chip, common on older vehicles. Replacing it is mostly cutting.
- Transponder (chip) key: looks plain, but a chip in the head talks to the car's immobilizer. The blade turns the ignition; the chip lets the engine run.
- Remote-head key: the blade and the lock buttons share one head. The chip and the remote are usually programmed as separate steps.
- Smart or proximity key: a fob that stays in your pocket while you press a start button. It usually hides an emergency blade for the door.
Not sure which you have? The year, make and model usually tell us.

All keys lost vs. adding a key
Adding a key to a car that still has a working one is routine. When every key is gone, we create the first key from nothing. We read the cuts from a door lock with Lishi-style decoder tools, or cut by code when one is available, then connect a professional programmer to register the new key with the car.
An all-keys-lost job takes longer, but for most makes and models it's still done on site. Our lost car key guide covers what to do first, and the Boise car key replacement guide compares your options.
Erasing the lost key from your car
If your keys were stolen or lost somewhere public, someone may now have a key to your car. On many vehicles, we can clear every key from the car's memory during programming, then register only the new ones. After that, the lost key won't start the engine.
Ask for this when you call. It's worth doing any time you're not sure where the old key ended up.

What to have ready when you call
- Year, make and model (the VIN helps too; it's on the registration and at the base of the windshield)
- Where the vehicle is parked, including the level if it's in a downtown parking garage
- A photo ID and the registration or title. We check both before making a key
- Any broken pieces of the old key. Sometimes we can read the cuts from them
- Whether you want one key or two. A spare made now is easier than another all-keys-lost call later
How it works
- Call usCall (208) 686-8099 with the year, make and model, and tell us what happened to the key.
- Get a quoteWe quote by phone based on what you describe.
- We drive to youArrival is typically 15–45 minutes in the Boise metro, depending on location and traffic.
- Cut and programWe check your ID and ownership papers, then cut and program the key on the spot.
- Test everythingWe test the blade, the start and every button before we leave. If we find something different at the vehicle, like a damaged ignition, we explain any new price before doing extra work.




