Open 24/7 · Mobile service across the Treasure ValleyOpen 24/7(208) 686-8099 · Español
Car Key Masters ES (208) 686-8099

Lock Installation: Deadbolts, Handle Sets and Smart Locks

We install new door hardware at your home, including a smart lock you've already bought, and make sure it fits the door and works smoothly before we leave.

  • Open 24/7
  • Typical arrival 15–45 min
  • We come to you
Tool and key cases loaded in the back of the service vehicle

What we install

We install and replace home door hardware: deadbolts, knobs, levers, front-door handle sets and smart locks, in brands like Schlage, Kwikset and Yale. Buy the lock yourself and have us put it in, or call and ask what will fit before you shop.

Installation is different from rekeying, which keeps your hardware and changes the key. New hardware is the right call when a lock is damaged, worn out, the wrong style, or you want a feature like a keypad.

Will it fit? Three measurements to check

Most trouble with a new lock starts before it reaches the door: it's the wrong size. Check these three things, or have us check them:

  • Backset: the distance from the edge of the door to the center of the big round hole. Most homes use 2-3/8 or 2-3/4 inches, and many new locks adjust to either.
  • Bore size: the width of that big hole. The common size is 2-1/8 inches. Some older doors have smaller holes that need enlarging.
  • Door thickness: most exterior doors are about 1-3/4 inches. An unusually thick door may need an extension kit from the lock maker.

If something doesn't match and the door needs extra work, the technician explains it, and the price, before doing it.

Rekeying pin kit used to rekey house and business locks on site
Rekeying pin kit used to rekey house and business locks on site

Smart locks you already bought

Most smart deadbolts use the same holes as a standard deadbolt. The usual trouble isn't the electronics, it's the door. If you have to push, lift or pull the door to throw the bolt by hand, a motor will struggle too: batteries drain fast and the bolt can stall halfway.

So before mounting anything, we check that the bolt slides into the strike plate without rubbing, and adjust the strike if needed. Then we mount the lock, test it with the door closed and try the key override if there is one. The app, Wi-Fi and codes are set up on your own phone, since that account belongs to you.

Need help now?24 hours a day, 7 days a week · Calls only, no text messages
(208) 686-8099

Replacing locks after a break-in

If someone got in, call the police first. Then look at the whole door. A kicked door usually fails at the frame: the strike plate tears out of the thin trim wood while the deadbolt survives.

When we replace damaged locks, we check the strike side too. A heavy-duty strike plate with long screws that reach the wall framing makes the next kick much harder. If the door or frame is split, that part may need a carpenter, and we'll tell you plainly what we see. If keys were taken, the new locks get a new key.

Open rear hatch of the service vehicle full of locksmith equipment
Open rear hatch of the service vehicle full of locksmith equipment

New locks that match your keys

New locks usually come with a different key in every box. Before installing, we can set the new cylinders to match your current house key, or key them all alike, so one key opens every door. This works within the same keyway; our rekeying page explains why.

Knob, lever, handle set or deadbolt?

  • Knobs are the classic round handle, fine inside and fine outside when paired with a deadbolt.
  • Levers push down instead of twisting, which is easier with full hands or sore wrists.
  • Handle sets have a tall outside grip with a thumb latch, usually on front doors, with a matching deadbolt.
  • Deadbolts are the real security on an exterior door. The bolt stays out until someone turns the key or thumb-turn, unlike a spring latch that can be slipped.

How it works

  1. Tell us what's going inThe type of lock, the brand and how many doors. You get a quote by phone.
  2. Fit checkThe technician measures backset, bore and thickness and checks how the door closes.
  3. InstallThe old hardware comes off, the new lock goes on, and the strike is adjusted so the bolt lines up.
  4. TestEvery key and the thumb-turn are tested with the door closed before the technician leaves.
FAQ

Common questions

Can you install a lock I bought myself?

Yes. We check the fit before starting. Keep the box and receipt until it's installed, in case your door needs a different size.

Do I need a deadbolt if my doorknob locks?

On an exterior door, yes. A knob's spring latch can be slipped or forced far more easily than a deadbolt.

Can my new locks work with my old key?

Often, yes, if they share the same keyway. We can set the new cylinders to your existing key during installation.

Will my smart lock work on my door?

Most smart deadbolts fit a standard deadbolt hole. The bigger question is whether the bolt moves freely with the door closed, which we check first.

Do you install locks for businesses?

Yes. See our commercial locksmith page for master key systems and high-security locks.

Free quote

Tell us what happened

Send the details and we will call you back with a price. For a lockout or anything urgent, calling is faster.

(208) 686-8099Calls only, no text messages · 24 hours a day, 7 days a week

We use these details only to call you about this job. Privacy policy