Lost, dead or broken: three different problems
Before you replace a fob, it helps to know which problem you have, because the fix is very different:
- Lost: the fob is gone. You need a new one programmed to the car, and on many vehicles we can erase the lost fob so it stops working.
- Dead: the buttons quit, or the dash warns that no key is detected. Often it's just the battery, which doesn't call for a new fob.
- Broken: a cracked case, a snapped key ring loop or worn-out buttons. The electronics inside are often fine and can move into a new shell.
For batteries, shells and buttons, see car key repair. Water-damaged fobs can sometimes be recovered, and we look at those case by case.
Keyless entry remote or smart key?
A keyless entry remote has lock, unlock and maybe trunk or panic buttons, but you still use a key to start the car. A smart key, also called a proximity key, lets you unlock by touching the door handle and start with a push button while the fob stays in your pocket.
The difference matters. A smart key has to be registered with the car's immobilizer as well as for keyless entry, so it needs professional programming. Many plain remotes are simpler. If your remote and key blade are one piece, also see car key replacement.

Programming the new fob
A new fob does nothing until your car learns it. We connect a professional programmer, such as the Autel IM608, plus a jump pack to hold the battery voltage steady, then pair the fob. Before leaving, we test every button, keyless entry at the doors if your car has it, and the push-button start.
Bought a fob online? We can program many of them after a compatibility check. The part number and frequency need to match your vehicle, and some used fobs can't be reprogrammed. We can't promise third-party fobs will work. Our car key programming page explains more.
A word on aftermarket fobs
Aftermarket fobs are made by companies other than the carmaker. Many work fine, but the case, buttons and range vary more than with original parts. If you're considering one, ask us when you call so you can decide with the trade-offs in mind.

Cold mornings and fob batteries
Fob batteries are small coin cells, and cold weather lowers the power they can deliver. That's why a weak battery often shows up first on a frosty Treasure Valley morning: the range drops, buttons need several presses, or a push-to-start car can't find the key. It may work again once the fob warms up in your hand.
When that starts happening, replace the battery before it quits. On many push-to-start cars, holding the fob right against the start button will still start the engine on a weak battery; your owner's manual shows the spot. If a new battery doesn't help, the fob needs repair or replacement.
How it works
- Call with the detailsTell us the year, make and model, the type of fob, and whether it's lost, dead or broken.
- Quote by phoneWe quote based on what you describe. If we find something different at the vehicle, we explain any new price before doing extra work.
- Replace and programWe check your photo ID and registration or title, then pair the new fob with your car.
- Test every buttonLocks, trunk, panic, keyless entry and start, all checked before we leave.




